LabelWriter Wireless Printers

When the DYMO LabelWriter Wireless label printer is connected to your computer through USB, you can change the mode of the printer's wireless radio.

To change the wireless mode

1. Select a LabelWriter Wireless printer.

2. Click Printer status.

   The LabelWriter Wireless Printer status page appears.

3. Select one of the following wireless connection options:

   • Client – Turn on client mode so that you can configure the printer for your wireless network.

   Refer to the LabelWriter Wireless User Guide for information on configuring the printer on your network.

   • Turn on access point – Turn on the printer's access point to connect directly.

   If neither mode is checked, wireless mode is turned off.

4. Close the page.

See Also

About Label Printers

Adding a Network Printer